{"product_id":"bt-fwhppwt-trio","title":"20' x 20' Premium Canopy Tent Trio, White","description":"\u003cdiv style=\"font-size:18px;line-height:1.75;color:inherit;\"\u003e\n\u003cp style=\"font-size:20px;font-weight:700;margin:0 0 4px 0;\"\u003e20' x 20' Premium Canopy Tent Trio, White\u003c\/p\u003e\n\u003cp style=\"font-size:13px;color:#888;margin:0 0 20px 0;letter-spacing:0.03em;\"\u003eItem #: BT-FWHPPWT-TRIO\u003c\/p\u003eKit Includes:\n\n(1) 20x20 Single Piece Premium Pole Tent Tops\n(1) 20x20 Premium Pole Set\n(1) 20x20 Single Piece High Peak Tent Top\n(1) 20x20 High Peak Tent Frames\n(1) 20x20 Single Piece West Coast Tent Top\n(1) 20x20 West Coast Tent Frame\n3\/4\" x 30\" Steel Stakes and Rope\n\nPremium Pole Tent Features:\n\nSingle Piece tent top\nOur best quality, 16oz blockout PVC vinyl top\nTops are made with mildew resistant, flame retardant material.\nReinforced aluminum plates are sewn into top all points for heavy-duty installation.\nAll panels are bonded with 1\" heat-sealed overlapped seams.\nScalloped valances bond with vinyl binding.\nSidewall rope permanently installed.\nPermanently attached 1\/2 diameter polyester rope with rope tensioners.\nGuy ropes and jump ropes are spliced in at each pole location.\nDetailed installation instructions are sewn into a tent top storage bag.\n\nHigh Peak Tent Features:\n\nOur best quality 16 ounce blockout PVC vinyl\nAll panels are bonded with 1\" heat sealed overlapped seams\nCast aluminum corner fittings\n2.5\" anodized aluminum frame\nFrame tension design with tension cables and optional flag\nEliminates side poles and center pole - which provides more space\nTension cables cross from corner to corner to support the center mast\n8' Tent Legs\n\nSafety: We only sell or distribute tents that use a fire resistant vinyl meeting or exceeding the National Fire Protection Association's fire resistant standards.:\n\nSAFETY PRECAUTIONS : Weather is unpredictable, installer\/end-user must incorporate knowledge of local weather conditions in accordance with the installation instruction guidelines.:\n\nRain water may collect on the tent fabric perimeter causing \"ponding\" or \"water pocketing\". Ensure the tent is installed and tensioned correctly. The additional weight from the water can cause the tent to sag, ponding will get worse. This may cause partial or complete collapse and damage to the top\/frame components\/and poles.\nWind, Wind\/Rain combination can cause rope\/ratchet and ground stakes to loosen. This may cause partial or complete collapse and damage to the top\/frame components\/and poles.\nLightning: Immediately evacuate the tent until the chance of a lightning strike is no longer present.\nSnow: Tents, canopies, structures, and shelters are not designed to carry any type of snow loading. These products should not be used if snow of any kind is present, and must be evacuated immediately.\nIt is very important to do routine maintenance checks on ropes\/ratchets and stakes and maintain proper tension on the tent top at all times\n\nWest Coast Tent Features:\n\nExpandable system, allowing for additional parts to be purchased to enlarge your tent, rather than buying a whole new tent\nOur Best Quality 16oz block-out PVC vinyl single-piece tent tops\nTent tops are resistant to mold, mildew, flame and are 100% waterproof\nAnodized aluminum pipes are rust-resistant and prevent oxidation\nGalvanized steel interchangeable fitting system\nAll seams are heat sealed and have a 1-inch overlap\nMulti-layered reinforcement at all pole positions\nMost parts are interchangeable to other manufacturer's west coast frame tents\nFreestanding frame that has a higher wind load than traditional pole tents\nIncludes a 6\" x 6\" base plate for each leg for anchoring to asphalt. (This does not replace the need for ground staking, it is only for securing the leg to the asphalt)\n\nTent Leg and Pole Sizes:\n\nTent Leg s - 6' 8\"\nHip Rafters - 14' 4\"\nRafters - 10' 6\"\nSpreaders - 9' 4\"\n\nSAFETY PRECAUTIONS : Weather is unpredictable, installer\/end-user must incorporate knowledge of local weather conditions in accordance with the installation instruction guidelines.:\n\nRain water may collect on the tent fabric perimeter causing \"ponding\" or \"water pocketing\". Ensure the tent is installed and tensioned correctly. The additional weight from the water can cause the tent to sag, ponding will get worse. This may cause partial or complete collapse and damage to the top\/frame components\/and poles.\nWind, Wind\/Rain combination can cause rope\/ratchet and ground stakes to loosen. This may cause partial or complete collapse and damage to the top\/frame components\/and poles.\nLightning: Immediately evacuate the tent until the chance of a lightning strike is no longer present.\nSnow: Tents, canopies, structures, and shelters are not designed to carry any type of snow loading. These products should not be used if snow of any kind is present, and must be evacuated immediately.\nIt is very important to do routine maintenance checks on ropes\/ratchets and stakes and maintain proper tension on the tent top at all times\n\nSafety: We only sell or distribute tents that use a fire resistant vinyl meeting or exceeding the National Fire Protection Association's fire resistant standards.:\n\nCalifornia Prop 65 Warning: This product can expose you to chemicals including PolyVinyl Chloride (PVC), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, click this image or visit \nwww.P65Warnings.ca.gov\n.\u003c\/div\u003e","brand":"POGO Bounce House","offers":[{"title":"Default Title","offer_id":48703072239841,"sku":"BT-FWHPPWT-TRIO","price":8826.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/0216\/2145\/files\/premium-tent-trio.jpg?v=1784654883","url":"https:\/\/inflatablebouncehouseforsale.com\/products\/bt-fwhppwt-trio","provider":"Inflatable Bounce House For Sale","version":"1.0","type":"link"}